Archive for December, 2013

Why there is a need for voltage regulator?

Power supply is fed to the consumer from very long distance through various distribution networks. Due to this reason, there is considerable drop in voltage, which needs to be boosted up when it reaches to its consumers.

In addition to that, lots of power fluctuations are also observed due to various kinds of electrical loads connected to the AC power supply.

In order to keep the power supply voltage steady for correct operation of the electrical appliances there is great need for Voltage Stabilizer Faridabad, which will always maintain constant voltage output.

How does the voltage regulator maintain constant voltage output?

For satisfactory performance of any sophisticated electrical or electronic appliances, it is necessary that it must get steady electrical supply where voltage input must remain almost constant.

If Automatic voltage regulator is used in the power supply line then it will automatically boost up the voltage output to higher level if it is dropped, so that it will offer regulated supply voltages to the line.

Similarly, if there is sudden increase in the supply voltage then the regulator will automatically reduce the voltage to required level.

This kind of regulation can be achieved by servo control mechanism. Servo control can be achieved either with motorized control or with the help of electronic control circuit.

How can you make right selection of voltage regulator?   

If you are interested to install proper voltage regulator for your power supply line then you must first of all decide which kind of appliances are to be connected and what is their power requirement. Based on that input, you will choose the power capacity of your voltage regulator.

Next, you have to know how much variation you expect from your power supply line. Most of the Servo Stabilizer Manufacturers Delhi supply their product with 10% variation on the power supply line. However, if you observe that your power line has variation, which is more than 10%, then you can get voltage regulator as per your requirement.

You can make right selection of the voltage regulator by looking at the specification sheet provided by the Servo stabilizer manufacturers.

A lot of people confuse transformers with generators. While the former is used to fluctuate between current and voltage (and also control the voltage fluctuation), the latter is used for converting mechanical energy into electrical energy by using the principle of electromagnetic induction (and magnetic coils). Transformers are pretty essential for every household as well as factory to prevent your devices from malfunctioning. Any voltage fluctuation that takes place can result in your electrical devices and machines suffering from short-circuit, a phenomenon that can destroy your machines and electrical equipments.

While choosing a small auto transformer can be relatively easy, since you just have to look at the kVA rating, you might have to evaluate in detail when it comes to choosing transformers for factories and mills. You have to judge the usability of a transformer on two basic facets – firstly, the amount of load it can handle and secondly, its application. If you are not a technical guy, you can contact Transformers Manufacturers in Faridabad and summon an engineer/technician for inspection to your factory. The technician can check the power consumed by your machines before suggesting you a transformer that can work well in your factory.
Following are the two main considerations while choosing a transformer:
  • Ability to handle load: It is considered a rule of thumb to choose a transformer in such a manner that the load it is designated to handle is not more than 90% of its capacity. For example, if you have to handle a load of 900kVA, it is preferable to get a 1000kVA transformer installed. This way, it can succinctly work even when there’s an overloading.
  • Application: Different industries need a transformer for different purposes. While some want a constant supply of voltage, there are others that might require a transformer that can handle frequent overloading.
Also, one should take care of Distribution Transformer Faridabad . They help a lot in handling load.

One of the leading manufacturers known for its quality services and product offers a vast range of Rectifier Equipments, transformers and Servo Voltage Stabilizers. The variety of distribution and power transformers offered is acknowledged worldwide for its best quality and efficiency. Get services from a supplier and exporter, leading manufacturer, with thousands of installations in India and abroad.

Nowadays, getting a constant supply of electricity is becoming extremely difficult. Over a period of time energy has become one of the important topics of discussion not only between countries but has also reached to the level of an ordinary citizen; this makes Electrical Transformer Faridabad.

Power cuts caused by bad weather or faulty wirings can be reduced by efficient power gadgets. Servo stabilizer manufacturers provide voltage stabilizers that enhance the life and operating efficiency of sensitive electronic equipments by providing protection against voltage fluctuations.

What are the various factors that determine life of a Electrical transformer?

Most of the Electrical transformer manufacturers design these power gamuts keeping in mind insulation quality. Moisture and intense heat are the detrimental aspects. In respect to increase in power consumption from the past few years there have been changes in the design and quality of transformers which ensures that they have the ability to run at a full capacity.

Check out the products of one of the leading Electrical transformer manufacturer:

A leading producer and supplier provide huge variety of power gadgets such as Ultra Isolation Transformers, Voltage Stabilizers, for power supply to Electric Furnace efficiently designed Arc Furnace Transformer, BEE approved transformers, Silicon Rectifier Equipment that support variety of industrial applications, Rectifiers and controllers for Anodizing and Electroplating Industry and lighting transformers.

Servo Stabilizer Manufacturers have been supplying a lot of material outside India. They have exported quality material to places in the Middle East. Electrical Transformer Manufacturer Faridabad from all over India have created such quality material which is the main reason behind its worldwide presence. These transformers are durable and of the best in business. The electrical circuits can withstand high loads and there is no load shedding. But all this has not come easy. There has been a lot of innovation and the assessment of the materials used in manufacture.  Exports of Electrical Goods have contributed heavily in the national income.